Never Have To Refill Your Coffee Maker Again

Transform your mornings with ultimate convenience! Say goodbye to the hassle of refilling your coffee maker. With this innovative kit, you can enjoy automatic refills of fresh, filtered water in seconds—no more trips to the sink! It seamlessly connects to your brewer’s reservoir, ensuring you always have crisp and clean water.

 

The kit maintains the water level in your coffee maker's reservoir by connecting to an existing 1/4" water line, just like your ice maker. It features an easy-to-install float valve that effortlessly regulates the water level. 

 

In just a few minutes, you’ll have a hassle-free coffee routine. Elevate your coffee experience with the Coffee Maker Auto-Refill Kit!

 

How to Install Your New Water Filter System: A Step-by-Step Guide

If you're installing a water filter system for your coffee maker, following the right steps can streamline the process and help ensure a successful setup. In this post, we'll walk you through each step to get your water filtration system up and running smoothly.

 

Tools Required

• Drill

 

Step 1: Prepare for Drilling
Start by using the included drill bit to create a **5/8" hole** in a suitable location on the coffee maker. This hole will need to accommodate the mounting shaft of your water filter system. Make sure to drill carefully for a clean fit!

 

Step 2: Secure the Valve Body
Next, take the valve body and position it in the drilled hole. Use the **plastic nut** to tighten the valve body into place. The nut will compress a **silicone washer** on the inside and a **hard plastic washer** on the outside to form a secure seal.

 

Step 3: Connect the Elbow Adapter
Now it’s time to attach the **90-degree, 1/4" elbow adapter** to the valve body. Insert the adapter and stop when the elbow is facing rearward. This positioning is essential for the flow of water.

 

Step 4: Insert the Polyethylene Tubing
Take your **1/4" polyethylene tubing** and insert it into the elbow adapter until it reaches the stop point. This tubing will carry the filtered water to your appliances.

 

 Step 5: Install a Shutoff Valve
To ensure convenience when it comes to maintenance, consider installing a **shutoff valve** on the other end of the tubing before it connects to the elbow. This feature allows you to turn off the water flow whenever you need to clean or descale your coffee maker, ensuring that you can easily manage your system.

 

Step 6: Split the Water Flow (Optional)
If you want to split the filtered water to additional appliances, such as a refrigerator, you can add a **tee adapter** after the shutoff valve. This allows for additional connections and the versatility to service multiple appliances.

 

By following these steps, you can effectively install your water filter system with ease. Enjoy the benefits of clean, filtered water for your coffee maker and other appliances with this straightforward installation process! 

Happy brewing!

 

Tap View on Amazon on any card to shop instantly.